EmBRICK® is a modular, open-source I/O system for the realization of various control/measurement and control systems. It consists of one master and several EA-modules, we call them bricks. The design as an open-frame finished components combines the advantages of a PLC (emBRICK ® optimally available immediately, arbitrarily scalable, no development costs) with those of embedded systems (low price, integrated signal conditioning, direct sensor/actuator connection, low inherent power requirement, freely expandable).
The mounting is done without configuration by plugging together the bricks and fixation on a patch board (plug-disk) or a DIN rail housing. A steadily growing number of industry-specific bricks allows the direct adaptation of the usual sensors and actuators without consuming additional components.
As a control master is every µ-Controller and of course platforms such as Raspberry Pi or beaglebone black via SPI or GPIOs can be connected. Other Master such as PCs or NUCs can be via a coupler via LAN, WLAN, CAN, serial interfaces or customer-specific interfaces with emBRICK ® communicate with each other.
As a control master is every µ-Controller and of course platforms such as Raspberry Pi or beaglebone black via SPI or GPIOs can be connected. Other Master such as PCs or NUCs can be via a coupler via LAN, WLAN, CAN, serial interfaces or customer-specific interfaces with emBRICK communicate with each other.
The programming is done in any way, e.g. with C, C++, IEC 61131, LabVIEW or even model is based with different UML tools. For this purpose, a variety of open drivers and starter kits with source code available.
With emBRICK® high-performance control solutions from 5 to 1000 I/Os (with several nodes) out-of-the-box. Typical areas of application are automation tasks in machine/plant construction, building automation or in measurement, control, regulating, or process technology. Prototypes, with this approach in the shortest time available.
This module includes 8 inputs for KTY temperature sensors.
Typically, the modules with a temperature sensor KTY81-210 (2 kOhm at 25 °C). The module has two terminals for each sensor, so that no external wiring is necessary. The available temperature range from -30 to +80 °C.
Highlights & Details
- 8 temperature inputs for KTY81-210 Sensors
- Temperature range of -30 to +80 °C
- Warranty: 24 months
- Manufacturer: emBRICK
Length | 44 mm |
---|---|
Width | 72 mm |
No. of analogue inputs | 8 |
Manufacturer part # | VIM0-0106-00 |
Type | B-8Temp-01 |
Product type | PLC add-on module |